[TowerTalk] UNI-KIT flavor and fastening

[Bob Wanderer]

Yes, Dick, I forgot about the hole at the end of the tail!
73
Bob AA0CY
We had Denver weather this weekend.  70 Saturday Snow Sunday

----------
From:  Dick Flanagan[SMTP:dick@libelle.com]
Sent:  Monday, April 10, 2000 3:08 PM
To:  Tower-Talk Reflector
Subject:  RE: [TowerTalk] UNI-KIT flavor and fastening


>I understand the Trylon tower is not made of tubing but angle brackets.
>Does the UNI-KIT come with hardware to clamp it to the tower?
>
>>When I was there, it did not.  It might now.  The product, however, was
>>designed for the commercial market which usually means Rohn and that
>>spells tubular.  Check with the factory as to the best way to handle this.
>
>If so will
>that hardware work with the Trylon tower?  If not, what fastening hardware
>do I need?
>
>>Check with the factory gurus.  I'm sure that the tail can be connected to
>>angle brackets with not too much difficulty.

UNI-Kit tails come predrilled for bolting to a flat surface.  I'm
actually not sure how they would be best connected to tubular surfaces,
but they work VERY well with SS 1/4-20 bolts to a flat angle-iron tower
member.  That's how I have them connected on my 70' USTower.

73, Dick

--
Dick Flanagan W6OLD CFII Minden, Nevada DM09db (South of Reno)
Visit http://www.cvrc.net/



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm




--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm