[TowerTalk] Source for .065 or .058 wall 2 inch OD aluminum?

Wyllma Wall billwall@bellsouth.net
Sat, 22 Apr 2000 05:54:43 -0400


Hi all TT's,

Patrick try Marmon Keystone Metals. Their corporate headquarters might be
able to give you a dealer near your QTH.  Their # is 1-412-283-3000. I
would use 3" OD X .125 wall for 40m. BTW it is sold only in 24' lengths.
They sell only quality aluminum.

                                                                   Bill
Wall  @ Antenna Mart Quads

KC4UZ

Patrick Barkey wrote:

> I am having some difficulty locating a source for
> 20 foot pieces (24 foot OK) of 2 inch OD, .058 or
> .065 wall aluminum that I was planning to use for
> a 40 meter boom design.  6061-T6 or equivalent
> is a must.
>
> Does anyone out there know of a source?  Some
> where within a day's drive of Indiana would be
> preferred.
>
> I will report back with a summary if others are
> interested.
>
>    - Pat
>      N9RV
>
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm