[TowerTalk] Re: rohn hdbx48

[n4kg@juno.com]

Hi Gary,

N4UV made a tilt over arrangement for his HDBX-48 
with HG  105BA and HG 155BA antennas.  He built
an A frame, backguyed,  with a pulley on top, and
a winch.  Unfortunately, I don't recall where he made
his attachment.  Believe he used only one point.
He bolted short 2 inch diameter pipes to each leg
and had supports on each side of each leg imbeded
in concrete.  A HEAVY bolt was placed through each
leg.  I'm not sure if he had a second bolt in each leg
to help distribute the load after the tower was erect.
He is no longer active.  I'm not sure if he is still in town.

73 / GL,  Tom  N4KG


________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com