[TowerTalk] Yaseu G-1000

[Bob Allen]

Just put up one of those rotors.  The manual says to drill a 9 mm diameter
hole through both walls of the mast, centered 50 mm from the mast bottom.
I was advised not to do that, because a violent wind that twisted the mast
could break the rotor.  

73, Bob   KK5MI

At 08:00 AM 08/17/2000 -0600, Ken Eigsti wrote:
>
>Good Morning all,
>Neeed some help. I have a Yaseu G-1000 rotor installed on a tower at a
>different location. I am upgrading the mast in order to stack antennas. I
>do not have a manual for the rotor. 
>
>Can anyone tell me the distance from the bottom of the mast to drill a hole
>if I want to pin the mast in the rotor?
>
>Tnx
>73
>Ken W0LSD
>
>
>--
>FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com