[TowerTalk] Ham shop metalworking DE K0FF

[Tom K Osborne]

On Thu, 24 Aug 2000 10:04:10 -0500 "K0FF" <K0FF@ARRL.NET> writes:
 A small squeeze can of Tappit or Tappit  for Aluminum will last a decade
in the home shop. 

Hi All

One thing you have to be careful of is what happens to the oil when it
gets hot.  We used to use Maltby's in the shop where I used to work until
someone read the MSDS sheet and found that when Maltby's gets hot, the
smoke is carcinogenic.  You can't safely just use anything without
checking it out.  l73
Tom W7WHY
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com