[TowerTalk] LMR-400 UltraFlex

[Joe Sloss]

Am using LMR-400 UF from the 6m beam, down the mast, to the top of the tower
where it will  connect (w/ N fittings) to 1/2" Times hardline.  Would
appreciate comments from those who have used LMR-400 regarding amount of
loop to allow for mast rotation.  Any ideas regarding the physical mounting
of the LMR-400/hardline junction to minimize movement of this connection
also welcomed.  Thanks, Joe K7MKS


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com