[TowerTalk] rotor plate bolt hole patterns

[WA9ALS - John]

The patterns are not the same.

I believe the Yaesu mast clamp(s) is such that it's self-centering...?

The T2X however, will require shim stock if your mast is smaller than the
"perfect" diameter (the diameter for which the mount was designed to be
centered).  I'm at work right now, so I can't check the manual for that
number.  I'm sure that someone will chime in with that info...
---------------------------------
WA9ALS - John
jfleming@shelbynet.net
http://www.qsl.net/wa9als
---------------------------------
----- Original Message -----
From: Stephen Reichlyn <ryansci@InfoAve.Net>
To: <towertalk@contesting.com>
Sent: Monday, February 14, 2000 9:56 AM
Subject: [TowerTalk] rotor plate bolt hole patterns


>
> Good Morning, all:
>
> Can anyone tell me if the rotor plate bolt hole pattern for the Yaesu
> series of rotors (800-1000 series) is the same as for the HyGain T2X
> tailtwister? Would I have to shim a 1 3/4 inch mast to properly center  it
> for a TTwister or Yaesu rotor to smoothly turn a full 360? I am going to
> use the rotor on a rotor base for a US Tower MA550MDP.
>
> Thanks, in advance, for your help.
>
> Regards,
> Steve AA4V
>
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm