[TowerTalk] identify tower

[Stu Greene]

you have no greetings for women?  shame

At 05:23 PM 1/5/00 -0500, you wrote:
>
>
>greetings men. this is my first post to reflector,looks like lots of
>interesting stuff.  i am trying to identify the manufacturer of a tower i
>installed a couple of years age..the tower is made of all angle steel,
>face width about 24 inches.  the horizontal bracing is 1x1 angle iron and
>the x braces are 1 x 1/8 flat stock.  the sections are 12 ft long.  the
>leg joints are kind of funny as they flare out over the section below for
>about 1 ft. each leg joint uses 10 ea 3/8 bolts for a total of 30 bolts
>between sections.  i currently have 150ft of this up. very sturdy to say
>the least.  any one have any ideas.....t.y....w8zh


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm