[TowerTalk] RG-174.Conductive plastic. K0Ff
K0FF
K0FF@ARRL.NET
Sun, 11 Jun 2000 13:10:02 -0500
The other day, I remoted the meter on a Bird Wattmeter, and it would not
work with jumpers I made from RG174. Today another jumper using the same
stuff for a keying line went goofy, so I decided to solve the mystery once
and for all. After all I have a 3000 foot spool of this stuff from a
hamfest...
Wound up being a partial short from center conductor to shield. This
particular cable has a black plastic sheath under the braid, and over the
inner insulator. I never knew that this sheath is conductive to electricity!
Not much but since I left it on there, and actually stuck it into the center
pin of the connector, it presented a high impedance short/
Mystery solved. All connectors cut off, and will be redone properly...
Had no idea. Must be for some special shielding application.
Geo>K0FF
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com