[TowerTalk] GUY WIRE ENDS (re: Sag / Length)

K4OJ k4oj@tampabay.rr.com
Sun, 18 Jun 2000 09:21:21 -0400


I have seen this phenomenon, too

We tram a lot and sometimes once you get the antenna up top you tend to
forget about the tram since it did its job...if you have a pulley on your
tram cable be sure to use a safety line on it when it is at destination
topside.

When an unchecked runaway pulley goes down the tram and hits the hardware
keep the tram taught it won't be taught no more!

k4oj

----- Original Message -----
From: "K0FF" <K0FF@ARRL.NET>
To: <n4kg@juno.com>; <TOWERTALK@contesting.com>
Sent: Sunday, June 18, 2000 8:32 AM
Subject: Re: [TowerTalk] GUY WIRE ENDS (re: Sag / Length)


>
>
> -----Original Message-----
> From: n4kg@juno.com <n4kg@juno.com>
> To: TOWERTALK@contesting.com <TOWERTALK@contesting.com>
> Date: Sunday, June 18, 2000 5:49 AM
> Subject: [TowerTalk] GUY WIRE ENDS (re: Sag / Length)
>
>
> >
> >Extended guy wire ends can be used to make
> >neat looking safety attachments around turnbuckles.
> >
> >If your turnbuckles are connected directly to your anchor,
> >you can loop the end through the anchor and clamp it back
> >on itself.
> >
> >If your turnbuckles are 'In Line' with guy grips attached to
> >each end, there will be enough room to simply attach the
> >extended end of the guy (from above the turnbuckle) to
> >the anchor using another guy grip.
> >
> >de  Tom  N4KG
>
>
> There was a young man named Jim Probst who worked at the local radio store
> and did some tower climbing on his days off. One days he was on a 150
> footer, and after finishing, decided not to carry a  heavy wrech all the
way
> down. Instead, he hooked it on a carabiner and let it slide down the top
guy
> wire. The thing got up quite a speed, and when it hit the turnbiuckle, it
> kicked up with a big bang. The shock wave broke the turnbuckle and it
> seperated, and was not saftey wired. The guy wire let go, the tower fell
> down and killed him. An ironic twist is that he rode it down as had been
> instructed, but the tower fell over some HV electric feeder lines, and
> caught him between the tower and HV on the way down.
> Accidents like this usually are caused by a combination of errors. The
lack
> of anyone of them would have prevented it.
>
> Geo>K0FF
> >
> >
> >________________________________________________________________
> >YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> >Juno now offers FREE Internet Access!
> >Try it today - there's no risk!  For your FREE software, visit:
> >http://dl.www.juno.com/get/tagj.
> >
> >--
> >FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> >Submissions:              towertalk@contesting.com
> >Administrative requests:  towertalk-REQUEST@contesting.com
> >Problems:                 owner-towertalk@contesting.com
> >
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com