Wed, 22 Mar 2000 11:28:27 -0600
Ronald Anderson wrote:
> Well my TX2 lost it's indicator reading, I am assuming that the pot in the
> top end has gone.
Look in the manual. You can do resistance measurements to see what is open.
Then use the circuit diagram to plan a troubleshooting strategy. You can go
up the tower and check connections. Then short the "open" wire to check
wiring to the rotor. Then put the ohm meter on the rotor to verify pot is
This is the reason T2X owners keep a spare rotor in inventory.
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com