[TowerTalk] T2X Direction Pot

[K7LXC@aol.com]

In a message dated 03/26/2000 5:26:13 PM Pacific Standard Time, 
n5na@telepath.com writes:

> Does anyone know if the indicator pot in the T2X is the same as in the Ham
>  III/IV?  I have a spare Ham III and can pull the pot from if they are
>  interchangeable.  Otherwise I'm looking at temporarily replacing the T2X
>  with the Ham III until I can get the T2X repaired.

     Yes, the indicator pot is the same.
>  
>  Also, how big a job is it to change out the pot assembly?

      As already stated, beware of falling ball bearings. Other than that, it 
just involves some soldering and catching the tab on the pot with the notch 
in the upper bell housing.

     As long as you've got it open, be sure to re-grease the ball bearings. 
One thimble-full of grease is all you need.

Cheers,   Steve    K7LXC
Tower Tech 

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm