[TowerTalk] element repair
K7LXC@aol.com
K7LXC@aol.com
Fri, 31 Mar 2000 11:07:59 EST
In a message dated 03/31/2000 6:48:41 AM Pacific Standard Time,
sloss@mindspring.com writes:
> Does anyone have a favorite method for straightening small diameter elements
> (1/2" or so) that have been bent after years of lying around.
You can fill the element with sand and then it'll bend uniformly. There
is also a compound you can buy at a hardware store that does the same thing.
Cheers, Steve K7LXC
Tower Tech
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm