[TowerTalk] Pennant Transformers design analysis DE K0FF

[Pete Smith]

At 02:24 PM 11/1/00 -0600, K0FF wrote:
...
>Pennant Transformers according to Earl's design will be available
>shortly from Array Solutions. They are in a gasket cast aluminum box with
>a brass weep hole, and have a stainless steel rope eye, and gold
>plated binding posts.  The coil is wrapped in fiberglass tape, and
>dipped in liquid polystyrene for stability.
>
>The Beverage transformers according to my own design will be there also,
>and have Cast aluminum housing, gasket sealed, groundrod clamp and
>aux. brass ground screw, DC grounding of the antenna wire with a Knar
>fusible link, and an air gap, choke shunt to ground, gas tube protected, and
>on the coax side it is DC blocked,and drained.

when will pricing be available?  These sound very good, if they're not
prohibitively expensive.

73, Pete Smith N4ZR

Contesting is ... Extreme Radio

The World Contest Station Database 
is back up and running at
http://www.qsl.net/n4zr 



--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com