[TowerTalk] Cush R7000 - isolate failure box/vertical

[david feldman]

The R7000 here has developed a pretty serious intermittent problem which 
looks like a failure in the input connector, however, that is not the cause 
(I've dissected the "box", replaced the input connector, reheated all solder 
joints, etc.)... I can't further isolate the problem so I thought it might 
help to put a resistor or something across the decoupled output (top & 
mid-box connectors) to see if the intermittent is in the box or in the 
vertical part itself. Anyone tried this and if so what would be a suitable 
"dummy" load?

73 Dave WB0GAZ wb0gaz@hotmail.com

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

Share information about yourself, create your own public profile at 
http://profiles.msn.com.


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com