[TowerTalk] 45ag2 top section inside diameter??

[K7LXC@aol.com]

In a message dated 09/03/2000 2:59:47 PM Pacific Daylight Time, 
rick258@home.com writes:

> What is the maximum od of mast that will fit in the pointy top section
>  of rohn 45ag2?

    What - no Rohn catalog?

    The 45AG2 top pipe has an OD of 2.38" and I'm guessing that it has the 
same wall as the legs which is .083 inches. That would leave you with a 
little over 2 inches of ID. By the time you stick a 2" mast in there and 
leave some room for rotating it, I'd say 2" OD is about as big as you can go.

Cheers,   Steve   K7LXC
Tower Tech

--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com