[TowerTalk] rotator mast clamp
Richard Hassell-Bennett
hasben@ix.netcom.com
Mon, 25 Sep 2000 07:44:58 -0500
Hi Dick.
We manufacture parts for this type of application
If you can give me details of the 1 1/2 shaft I would be happy to make an
adaptor for you.
73 de Rich K0XG
take a look at www.qth.com/k0xg
----- Original Message -----
From: "Richard Zalewski" <w7zr@redrivernet.com>
To: "Tower Talk" <towertalk@contesting.com>
Sent: Sunday, September 24, 2000 4:38 PM
Subject: [TowerTalk] rotator mast clamp
>
> i have a rotating tower that has a 1 1/2" shaft that should couple to a
rotator.
> Problem is my T2X or my Create rotator mast clamps won't go down to 1
1/2".
> Looking for ideas.
> tnx
> Dick W7ZR XE2DV
> Check my web site www.w7zr.com
>
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com