[TowerTalk] Pinning Masts
K7LXC@aol.com
K7LXC@aol.com
Mon, 23 Apr 2001 11:03:24 EDT
In a message dated 4/22/01 9:20:04 PM Pacific Daylight Time, k0wa@swbell.net
writes:
> I do not like pinning of a mast no matter what the material is. Either the
> holes will elongate or the bolts will fail in time.
AND the forces will find the next weak link in the chain. In this case
it's gears or brake in the rotator. Ouch!
Cheers, Steve K7LXC
Tower Tech
List Sponsor: ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com