[TowerTalk] Re Tower talk Wire 4 square for 160m

[Kevin Adam, Webz By design]

I can feed the tower but  I want the gain that comes along with 4 square
I have heard that  a ham has feed the tower and the 4 square wires to
but don't know who he is.
All ideas accepted and guide lines to dimensions for a working system
would give a good idea I have been told 4 inverted L's work very good
and I do agree with him because all dx expeditions use usually are
inverted L's Due Space and size of antennas there are no antennas on it
as now this is just 160m 80m antenna system Rohn 25g tower just for
these bands it is guyed with fiberglass guy cable base has been
insulated to so I can go with grounded or insulated base sole idea of
this tower is just for 160m 80m if capacity hat is needed that is not
problem I can make one with fiber glass supports like 
Hex beam would be made.


N9IWW
Kevin Adam
1239 W. Till Rd.
Fort Wayne IN. 46825
219-490-7312
http://www.fortwayneradioclub.net/n9iww
n9iww@mail.com

-----Original Message-----
From: Ron Hill [mailto:jrh@lemoorenet.com] 
Sent: Thursday, August 02, 2001 8:42 AM
To: n9iww2@verizon.net
Subject: Re: [TowerTalk] Re Tower talk Wire 4 square for 160m

Why not feed the tower?

Ron, K6UR





List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com