[TowerTalk] Rotator Problem - follow up

Bob Nielsen nielsen@oz.net
Mon, 3 Dec 2001 09:17:45 -0800

On Mon, Dec 03, 2001 at 08:23:44AM -0500, T93m@aol.com wrote:
> In a message dated 12/2/01 2:21:10 PM Eastern Standard Time, K7LXC@aol.com 
> writes:
> << 1.  Apply two wraps of premium electrical tape (Scotch 33+ or 88). 
>  2.  Apply a layer of vapor-wrap material. Vapor-wrap is simply a butyl 
> rubber 
>  material that comes in rolls or sheets and does an excellent job of 
> isolating 
>  the joint from the elements. (Okay - you can use CoaxSeal for this. DO NOT 
>  put CoaxSeal directly on connectors!) >>
> Hello Steve, could you tell do I need to wrap the connector first with tape 
> then with coax seal and why.

Try removing the CoaxSeal after it has been on the connector and
exposed to the elements for a few years and you will understand.

Bob, N7XY

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com