[TowerTalk] Rotator Problem - follow up

[Dale L Martin]

>     Commercial vapor wrap (i.e. db Products, Antenna Specialists, Andrew,
> etc.) does not adhere permanently to the connector - it'll peel off - but
> since most hams use CoaxSeal, you have to be more careful with it.
>
>     Be sure to put more tape over the vapor wrap and what you get is a
> bombproof joint.
>

I'm not sure what vapor wrap is, Steve, but I put a layer or two of tape on
a joint, then paint it with liquid tape.  I'm sure it will be a pain to
remove (it's not over a connector), but it sure seems intact after over a
year on the tower.

Any comments, thoughts, etc., about liquid tape?


73,
dale, kg5u


List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com