[TowerTalk] Tall
Ron KA4INM Youvan
ka4inm@qsl.net
Mon, 10 Dec 2001 12:54:25 -0500
> I've often wondered that myself. I know that they exceed 2000' guyed.
> I've got a 2k in site of my roof. And then there are the self
> supporting ones. I don't know how tall they get. Sutro is about 1k,
> but I think there are taller ones.
Ideco-Dresser made several 1,200' self supporters, most survive
today, they were put "in city's" on smaller lots than guyed towers.
(several blocks square) These are black steel, not galvanized, just
painted over and over . . .
It takes between 30 and 40 acres to guy a 1,000. foot tower, unless
you don't care how much abuse it will take and short guy it.
75 to 80% of height to distance from the tower is about normal,
any more seems to be a waste.
The farther out a guy is, the more sideways the tensions pull against
the guy anchors and the heavier weight of the cables, loading the tower
more.
Short guying causes the wind forces to pull more straight up on the guy
anchor and the heavier they need to be, if in a soft earth.
73 (= Best Regards) de: Ron ka4inm@qsl.net SENT Time and Date are UTC
I upgraded to LINUX, the more I use it, the more I love it.
It doesn't do everything for you, you must program it.
Visit my HAM Web SITE at: http://www.qsl.net/ka4inm
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com