[TowerTalk] Thanks! And a tower id question

[Tom Mattus]

Thanks for the info on the cde rotor, helped allot!

Now I'm trying to identify a free standing tower with
the stampings of DMX 132a and DMX 132b on rivited
cross members. This tower is 40' tall, 3 leg. It
tapers from 26" between legs at the base to guessing 6
or 8" at the top. It does not exactly match anything
in the Rohn book, but the legs are simillar to the
"BX" type in it's construction as it is bent material
as opposed to pipe. 

Any ideas who the manufacturer is and what this might
be worth? It's in reasonably good condition.

Thanks much again!

Tom WA9WSJ



__________________________________________________
Get personalized email addresses from Yahoo! Mail - only $35 
a year!  http://personal.mail.yahoo.com/

--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com