[TowerTalk] Re: Orion 2800 control problem

[00tlzivney@bsuvc.bsu.edu]

Matt at M2 says that the 5 vdc I measured between pins 5 & 6 is consistent
with some early rotors - the note on the web site regarding 11.4VDC between
those pins refers to later versions.  He suggests looking elsewhere for
the problem - probably at the rotor connector at the top of the tower.
Now that the TowerTalk archives are back on line, I see that several
people have had problems with water getting into the connector.

Terry Zivney, N4TZ/9

--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com