[TowerTalk] Guy Anchor Failure

[Mike McCarthy, W1NR]

The Rohn specs state that guy anchors must be protected with tar from the
concrete block and  past where they emerge from the ground.

Mike, W1NR

> As previously stated, I believe protection all the way to the surface
> and above the surface by concrete should work as long as the total
> concrete weight and size are big enough for the job. However, if you
> scan the archives for "protective coating" you will find a K7LXC
> suggestion about protecting galvanized coatings with roofing tar or
> other preservatives. Seems logical to me.

Lyn, W4WDN

--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com





--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com