[TowerTalk] Portable tribander design help?
Guy Olinger, K2AV
Thu, 4 Jan 2001 21:31:34 -0500
Absolutely. Just remember not to rivet the pieces. Don't bother with the
goop. Push one rivet from each set of holes through the innermost hole,
and wrap black tape around the element to hold the rivet in. Using self
tapping screws will make them hard to get apart. Use nuts and bolts
where ever they are supplied.
Will blow away any other limited space tribander.
Apex, NC, USA
----- Original Message -----
From: RCARIELLO <RCARIELLO@si.rr.com>
To: Jim Idelson <email@example.com>; TowerTalk Post
Sent: Thursday, January 04, 2001 5:49 PM
Subject: Re: [TowerTalk] Portable tribander design help?
> Jim, Why not use the Force 12 C3SS. 12 foot boom, 2 elements each band
> it fits in a 4 foot box.
> Should take about an hour to put together and it works great.
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: firstname.lastname@example.org
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: email@example.com
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Administrative requests: towertalk-REQUEST@contesting.com