[TowerTalk] Re: Radials over salt water

[Ron D. Rossi]

>>>Ken Hirschberg said:
> ...
>  A somewhat more complex approach that would save some wire, would be to go out
> with say, 30 radials until the 0.015 spacing between wires was obtained, connect
> a circumferential wire to each radial, then add radial wires between the original
> 30 radials, from that ring outward.  When the spacing between wires again gets to
> 0.015, then add another ring, and so on, until the desired radial length is
> reached.
> ...

You could just put a "fork" in the radial splitting it into two at that point 
by adding a second wire as well.

-- 
73 es God Bless de KK1L...ron (kk1l@arrl.net) <><
QTH: Jericho, Vermont
My page: http://www.qsl.net/kk1l




--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com