[TowerTalk] Thrust bearing preference

[bill wall]

Hi Ron & TT's,
They have their home office in Tucker Ga. Contact them and they will put you
in contact with a dealer. While  talking to them request a catalog. They
were first with instant cold galvanize paint and many other specialized
products.
I had their E-mail address, but we just moved our co. and it is lost.
                                    Bill Wall  KC4UZ
----- Original Message -----
From: "Ron KA4INM Youvan" <ka4inm@qsl.net>
To: "towertalk" <towertalk@contesting.com>
Sent: Tuesday, January 23, 2001 4:47 AM
Subject: Re: [TowerTalk] Thrust bearing preference


> Hi:
>
> > Soooo....  What is LPS 3, and where can I get it?
>
>    LPS 1 is thin, (like WD-40) LPS 2 is thick, LPS 3
> is medium thickness and in a week or two it looks
> like brown wax, when you dig into it it is like a
> grease with a slight `skin', look in your catalogs,
> if I see it somewhere I will try to mention it here.
> I have used it for years and once the skin develops
> very little change is obvious.  Only problem is all
> LPS products stink not gud!
>
>   73 (= Best Regards) de: Ron ka4inm@qsl.net  SENT Time and Date are UTC
>       I upgraded to LINUX, the more I use it, the more I love it.
>         It doesn't do everything for you, you must program it.
>          Visit my HAM Web SITE at: http://www.qsl.net/ka4inm
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com