[TowerTalk] Take down Rohn 25G tower with crane?

[Brad Bradfield]

"Liquid Wrench", available at most any hardware store or home builder's
center, is one brand that I've used with good success for years.  As
Bill said, it sometimes takes more than one application and a bit of
soak time to fully work.

73,

Brad, W5CGH

==============================

> _________________________________________________________
> 
> Before you go to all that trouble, try penetrating oil first.
> Soak the bolt from both sides and give it several hours or even a
> day.  I've seen amazingly rusted bolts come loose that way.
> 
> Be sure you use oil made especially for freeing rusted nuts and
> bolts.
> 
> 73, Bill W7TI
> 


__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com