[TowerTalk] Take down Rohn 25G tower with crane?

[K7LXC@aol.com]

In a message dated 7/9/01 12:25:24 PM Pacific Daylight Time, n4kg@juno.com 
writes:

> A couple of good wrenches with long handles (9-12 inches)
>  should be sufficient to remove or break the rusted bolts.

    I agree - break 'em off and throw 'em away. New Rohn JBK's (joint bolt 
kits) are cheap.

    I think there is a commercial standard that says not to re-use tower 
bolts.

Cheers,   Steve   K7LXC
Tower Tech 

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com