[TowerTalk] Pointy Top / Mast Binding - Tips?

[SavageBR@aol.com]

I just use a piece of inner tube rubber wrapped around the mast with the 
bottom of the rubber a bit lose over the tube of the top section. I hold the 
rubber around the mast with a hose clamp. I do the same over the thrust 
bearing just to keep water out of the bearing. It takes a little more effort 
to tailor the rubber over the bearing This seems to work fine.

Bruce  AA4Z 

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com