[TowerTalk] US Tower MA850 Antenna Stacking

[BATTIN]

I am in the process of putting up a US Tower MA-850 with rotating 
base. I would like to mount a small HF beam on one of the telescoping 
sections. At full extension each section is 16ft apart. If I can I 
would like to stack a pair of C3s or a pair of the new Fluid Motion 
antennas. One beam could be at 87 feet and the other could be at 55 
feet. The separation can also be adjusted by tower height. Does any 
one on TowerTalk know if or what would be the best way to mount an 
antenna to the top of one of the telescoping sections on a MA series 
tower?

Jeff - Ko7p

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com