[TowerTalk] Re: Horizontal Loop

Ken McCormack zl1aih@ihug.co.nz
Sun, 22 Jul 2001 11:13:25 +1200


An article "Americanizing the German Quad" appeared in a 70's 
issue of "73 Magazine" and used an open stub to achieve a 
reasonable match to open wire line for 80 through 10 for a full wave 
horizontal 80m loop.    Using a 66' feeder, 4:1 balun, 30' RG8 and L 
match to rig, I smoked a BN-86 and an Amidon kit balun with only 
100 watts.   (slow learner)   With a matchbox-type tuner, the loop 
played quite well.   Change of QTH and proliferation of PCs brought 
lots of computer noise on 80 and 40, using vertical antennas.
Another full-wave 80m loop virtually eliminated the problem.   In A to 
B tests on 80m, the loop easily outperformed the Marconi "T" (30 
buried radials) up to 1500 miles, but for DX the vertical was far 
superior as expected.   Still using the match-box and open wire line.
For DX, I use the loop for receiving.

73, Ken ZL1AIH 

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com