[TowerTalk] homebrew 20m ground mouted vertical... good idea??

tttt ccccc k3hx@juno.com
Sun, 22 Jul 2001 15:42:45 -0400


OM,

It will likely not work as well as a dipole.  Nevertheless, it will be a
fun project and

won't cost a lot.  I'd use aluminum EMT in 1" with the bottom sitting on
a Coke

bottle and a few guys........low cost.

Or, you could get some aluminum tubing from a deceased CB antenna (the
radiator

on a 5/8 wave Super Thunder Talker Lightning Pro-XL Deluxe Radio Rambo 

Commando Force Field Projector) is just about right and it has a dandy
attachment

at the base for a mast pounded in the ground.

Or, some tubing from Texas Towers and mount it on a wooden post with
ceramic

stand-off insulators.....see the ARRL Handbook.

Hang a loading/matching coil on the bottom and it will work (albeit
poorly) on 40

and 30 as well.  For 20m, 15 radials, each 1/4 wave long should do you
well.

Enjoy!

73

Tim  K3HX

CW Elitist

QRP Snob

Old Fart

20 wpm Extra


________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com