[TowerTalk] Pier pin vs. burying in concrete

n4kg@juno.com n4kg@juno.com
Fri, 1 Jun 2001 06:01:23 -0600


There has been a lot of speculation that the downward
forces on the base plate would prevent rotation about
a pier pin.  I know of one example where I'm sure there
was enough torque to rotate about a pier pin.

N4AR has a pair of 200 ft R45 towers with the bottom
sections in concrete.  One of these towers has a 4 high
stack of CC 4L20's.  After a tornado passed by his QTH
he was cleaning up around the base of the tower when a
finger went down into a hole.  The tower rotated enough
to SHEAR OFF all 3 legs!

de  Tom  N4KG


________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com