[TowerTalk] Pier pin vs. burying in concrete

Steve Maki steve@oakcom.com
Fri, 01 Jun 2001 10:32:10 -0400


"Stan Stockton" <k5go@alltel.net> wrote:

>On Kurt's website he makes the following observation referring to a tower
>that is mounted on a pier with the equivalent of a ball socket mount:
>
>"Putting the tower on a free base connection has allowed us to increase the
>antenna loads by 49%."
>
> I am interested in a practical means of achieving this type of free
>rotating base. Will be out of town for 8 days, but will be interested to see
>if someone has a good, practical way of achieving this.

IF the Rohn flat plate were strong enough, one could simply place a
small spacer, like a large nut, around the pin & under the plate.

So the obvious solution would be to beef up the Rohn plate to an
appropriate thickness. I would guess 3/4" would do it for normal
ham installs. Kurt?

--
Steve K8LX

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com