[TowerTalk] house wiring ...rfi reduction

[w3svj@juno.com]

You might consider doing the AC wiring in BX. A tad more expensive but it
would put a steel or aluminum spiral jacket shield around your line
voltage wiring. The proper connectors should establish a pretty good
shielded ground to the distribution/service entrance panel. You could go
one step further and put it all in conduit (steel/aluminum not ENT) for
even more shielding but..... Ya gotta draw the line somewhere!


73 de Nate, W3SVJ, in Pittsburgh where it's not so smokey anymore.

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com