[TowerTalk] Braided Ground Strapping

Brad Bradfield b_bradfield@yahoo.com
Tue, 19 Jun 2001 05:42:34 -0700 (PDT)


Common practice in broadcast ground systems is to use only silver
solder on the ground bus.  This must be the "hard" silver solder as
used in air conditioning systems, not the "soft" stuff that's more like
standard tin-lead solder.  It looks like brazing rod and requires
acetelyne or MAP gas to melt.  I have probably 3/4 pound of the stuff
if anyone's interested.

73,

Brad, W5CGH

===========================

--- Paul McInnish - K4BET <k4bet@bellsouth.net> wrote:
> I would suggest one correction to a comment made and I quote:  "It's
> easy to
> solder any other wires...."!  Please, never solder any grounds!  The
> low
> melting point of solder will cause the joint to disintegrate
> extremely
> rapidly with a very small surge of lightning.  Then NO ground
> protection!
> 


__________________________________________________
Do You Yahoo!?
Spot the hottest trends in music, movies, and more.
http://buzz.yahoo.com/

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com