[TowerTalk] Roihn Guy Bracket GA25GD?

[Steve/n0tu]

I see Rohn recommends their guy assembly (GA25GD) accessory for attaching
guys to the tower. How many folks are actually using these verses attaching
to a single leg?  Are these brackets the preferred approach amoungst TTers?
Since it meets the MFGers specs my guess is this is the way to go? Right?
Comments?

Any chance someone have some they're not using? Please advise.

FYI, my installation will be 40' (later may go to 60' max) of Rohn 25 w/7sq'
of antenna 2' above thurst bearing. 3-guy (4A) burried concrete anchors on
50ft radius using 3/16" EHS. County wind rating is 85MPH (but I 've seen
100MPH plus winds at my QTH!)

Steve/n0tu


List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com