[TowerTalk] Force 12 C3 spacers

Roger Huntley huntleyr@gte.net
Wed, 16 May 2001 05:15:41 +0100


Jerry,
I would not worry one bit about the C31XR.  I have only had mine up for two
weeks but I have never been happier.  I also have an A4 up 80 feet in a tree
which I have worked 327 countries with and until now thought it was just
fine.  Every report I have had gives me 2 S units better signal with the
C31, both long hall and short distance QSO's.  It is very windy here tonight
(near Seattle) and the antenna SWR does not appear to be moving at all.  The
physical aspects of the antenna are excellent.

I also just assembled a C3 that we just shipped to Manihiki in the North
Cooks for this falls CQWW contest.  Again, an excellent antenna.

Go for it....

73,
Roger, W7VV

-----Original Message-----
From: owner-towertalk@contesting.com
[mailto:owner-towertalk@contesting.com]On Behalf Of Jerry Keller
Sent: Tuesday, May 15, 2001 2:53 PM
To: EUGENE SMAR; w6ter@worldnet.att.net; towertalk@contesting.com
Subject: Re: [TowerTalk] Force 12 C3 spacers

This is not the first report of some F12 antennas needing spacers to avoid
wind-whipping problems. I've heard of this before, from a fellow who took
his down. He reportedly asked F12 about this, was told they haven't had a
problem, but then was sent some spacers to alleviate the problem. The
conclusion he drew was that if the F12 had no problems with this, how come
they had spacers on hand to resolve the problem? I hadn't thought much about
this with only the one report, but now there's several....I had been
considering this antenna up until now. I am following this thread with great
interest.
Jerry  K3MGT

----- Original Message -----
From: EUGENE SMAR <SPELUNK.SUENO@prodigy.net>
To: <w6ter@worldnet.att.net>; <towertalk@contesting.com>
Sent: Tuesday, May 15, 2001 1:42 AM
Subject: Re: [TowerTalk] Force 12 C3 spacers


> Gerry:
>
>      The Bencher Skyhawk had a similar problem until they came up with a
set
> of phenolic spacers.
>
>      But I'm afraid they might have patented it.    ;>)
>
> 73 de
> Gene Smar  AD3F
> -----Original Message-----
> From: Gerald Smith <w6ter@worldnet.att.net>
> To: towertalk@contesting.com <towertalk@contesting.com>
> Date: Monday, May 14, 2001 8:55 PM
> Subject: [TowerTalk] Force 12 C3 spacers
>
>
> >I visited N7ML's QTH (Bozeman, MT) whereas he had six Force 12 C3's
> >stacked on a rotating 200' tower. He found he needed spacers,
> >non-conducting, between the driven elements tips to keep them from
> >hitting together during high winds.
> >
> >Has anybody experienced this? Anybody have a spacer design?
> >
> >Gerry, W6TER
> >
> >List Sponsor:  Champion Radio Products - We'll be at the Dayton
Hamvention
> >with all of our safety equipment and other products. Stop by booth #559
and
> >say hi.
> ><A HREF="http://www.championradio.com">www.ChampionRadio.com</A>
> >
> >-----
> >FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> >Submissions:              towertalk@contesting.com
> >Administrative requests:  towertalk-REQUEST@contesting.com
> >Problems:                 owner-towertalk@contesting.com
> >
>
>
> List Sponsor:  Champion Radio Products - We'll be at the Dayton Hamvention
> with all of our safety equipment and other products. Stop by booth #559
and
> say hi.
> <A HREF="http://www.championradio.com">www.ChampionRadio.com</A>
>
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
>
>


List Sponsor:  Champion Radio Products - We'll be at the Dayton Hamvention
with all of our safety equipment and other products. Stop by booth #559 and
say hi.
<A HREF="http://www.championradio.com">www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


List Sponsor:  Champion Radio Products - We'll be at the Dayton Hamvention
with all of our safety equipment and other products. Stop by booth #559 and
say hi.
<A HREF="http://www.championradio.com">www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com