[Towertalk] Guy Grip Question

n4kg@juno.com n4kg@juno.com
Wed, 10 Apr 2002 23:05:13 -0600


I assume you are talking about LOOSE guy wire,
not one that is pulled tight on a tower.

I use bolt cutters but agree, sometimes they don't 
cut all the way through, especially if the ends are loose.

I'm talking about 3/16 and 1/4 inch EHS as used on
MOST amateur installations.

Tom  N4KG

On Wed, 10 Apr 2002 23:19:28 -0500 Chuck Sudds <Chuck@dxham.net> writes:
> At 09:35 PM 4/10/02 -0600, you wrote:
> 
> Sounds easy, huh???   It really isn't that easy to cut through 
> decent size
> guy wire!!!   I tried hack saws, bolt cutters and even a chissel and 
> hand
> sledge-hammer but about the only thing that I could find that really 
> did
> the job was a good grinding tool!!
> 
> Chuck - KØTVD  (where we get plenty of ice <G>!)
> 
> >I think a pair of bolt cutters or hack saw would vandalize a guy 
> wire
> >a lot quicker than a screwdriver applied to a taut guy grip.
> 
> >Tom  N4KG   in  sunny  ALABAMA
> 
> 
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.