[Towertalk] anti-seize ?

[Jim White]

I believe you will see that No-Alox is indeed formulated for aluminum...yes
there are other compunds out there but my experience it is the least
expensive (even is in Home Depot).  I have been using it for
years...sometimes when I take a joint apart on an old yagi it is still
"moist" - of course that just might be some of our Florida humidity (see
below)*.

73,


Jim, K4OJ


* FQP is 11 days away! Go to:  http://www.qsl.net/fqp




----- Original Message -----
From: <brewerj@squared.com>
To: <towertalk@contesting.com>
Sent: Tuesday, April 16, 2002 10:44 AM
Subject: [Towertalk] anti-seize ?


> I'm getting ready to assemble my second beam, and am wondering
> what the best "anti sieze" material is? I've seen Noalox at the local
> hardware place and have used it for other applications, but wonder
> about its suitability in telescoping yagi tubing joints.
>
> Any recommendations?
>
> Thanks!
> John
>
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk