[Towertalk] FWD: HyGain 402BA-S

[Jim Idelson]

Oops, sent to wrong reflector first time...


Jim Idelson K1IR
email    k1ir@designet.com
web    http://www.designet.com/k1ir

---------- Forwarded Message ----------

FROM:      Jim Idelson <k1ir@designet.com>
TO:      CQ-Contest Post <cq-contest@contesting.com>
DATE:      Sun, 21 Apr 2002 08:31:43 -0400

RE:      

Wayne,

A problem that occurs at only 200W will almost certainly be in the driven 
element. You may have to take it down and find the loose hardware, bad 
connection or clean up one of the loading coils, but you don't have to buy a 
new antenna!

73,

Jim K1IR

[Towertalk] Hy=Gain 402BA-S 
Wayne F. King wfking@worldnet.att.net 
Sun, 21 Apr 2002 05:49:32 -0400 
Previous message: [Towertalk] HDR-300 
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] 

HI Folks,

I have a HY-GAIN 402BA-S 40 meter 2 el beam. It works fine on RX and 100 
watts TX. However it does not like high power anymore. Instant SWR 
infinity with the PA on. Even at 200 watts it appears to arch over. As 
long as I run less then 150 watts it's fine.

It's mounted at 110' and 15' above a Mosley Pro-57A. It's feed with 1/2" 
heliax and a RG-214U jumper to a WX0B 1.1 balun. I checked the feedline 
to the balun with a 50 ohm load and it's fine. The balun checked out 
fine. In fact I substituted a coax balun and still the same problem.

I thought I would run this by you folks before I take it down. Hopefully 
someone has a handle on this and maybe a fix other then buying a new 
antenna.

Thanks in advance.

Wayne N2WK



Previous message: [Towertalk] HDR-300 
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] 



Jim Idelson K1IR
email    k1ir@designet.com
web    http://www.designet.com/k1ir