[Towertalk] TX-472 Crank-up Problem

[Steve Katz]

Fred, what makes you think the problem is anything other than an aging drive
belt?  I'd simply replace the belt (a 5 min job, on the ground) and see if
anything's wrong after that.  

-WB2WIK/6

"If everything seems under control, you're just not going fast enough." -
Mario Andretti

> -----Original Message-----
> From:	Fred_W._Hurd@HUD.GOV [SMTP:Fred_W._Hurd@HUD.GOV]
> Sent:	Monday, August 26, 2002 5:07 AM
> To:	towertalk@contesting.com
> Subject:	[Towertalk] TX-472 Crank-up Problem
> 
> Hi Everyone - I put up a US Tower TX-472 motor driven tower about two
> years
> ago, and it has worked perfectly until this last Saturday. I was doing my
> monthly lowering and raising maintenance for the tower. I lowered the
> tower
> about half-way down, then started to raise it back up when it appeared to
> "lock-up" and the motor drive belt was slipping on the pulley wheel. It
> does not stick at any one spot, but by lowering a bit then raising it
> moves
> several feet before sticking again. Since it lowers easily, I think the
> cables are free and the pulley wheels are OK, but it keeps sticking at
> different places when I try to raise. It is now stuck at about three
> quarters the way up. I am thinking perhaps a loose or bad drive belt (??).
> Also, is there anyone in the Wash DC area that does tower repair? I am too
> old to be climbing anything to fix this problem (if climbing is needed).
> Please help me with some info if you can...thanks!  Fritz W4PKU.
> 
> _______________________________________________
> Self Supporting Towers, Wireless Weather Stations, see web site:
> http://www.mscomputer.com
> Call 888-333-9041 to place your order, mention you saw this ad and take an
> additional 5 percent off
> any weather station price.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk