[Towertalk] Base Plate, 58"sky Needle Tower

[K7LXC@aol.com]

In a message dated 12/20/02 10:54:01 AM Pacific Standard Time, 
tmannix@bellsouth.net writes:

> I'll ask again. Anyone have a drawing of the baseplate for this tower which 
> includes the rebar details. It would be much appreciated - and it will get 
my 
> friend(?) off my back! Please help me - he's driving me buggy!

    If it's just base size and rebar cage you need, I'd take a look at the 
equivalent US Tower model and make some inferences from that. That'll get you 
in the ballpark then make it a little bigger/over-engineer it a little and 
you should be good to go. 

Cheers,
Steve    K7LXC
TOWER TECH