[TowerTalk] Slopers from tower
UpTheTower@aol.com
UpTheTower@aol.com
Fri, 4 Jan 2002 11:29:09 EST
In a message dated 1/4/02 7:11:26 AM Pacific Standard Time,
owner-towertalk@contesting.com writes:
> Another example:
>
> K4VX/0 used 1/4 wave slopers for 160 meters fed about 10 feet below his 3
> element full sized 40 meter yagi. The yagi was at 130'.
>
> Obviously not 1/4 wave seperation between the feed point and the top load.
> But plenty of tower top load to act as a good counterpoise. Which is the
> important thing. Not the seperation between the top load and the
> feedpoint.
>
> 73
>
>
________________________________________________________________________
This list is sponsored by the new eHam.net Store. When you buy products
like ICE filters, Array Solutions StackMatch, or M-Squared Antennas from
the eHam Store for the same price you pay direct, a portion of the sale
price goes to support this list. Check it out at http://www.eham.net.
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com