[TowerTalk] Using guy wire to carry in coax lines?

Bob Alexander realex@flash.net
Wed, 9 Jan 2002 17:32:52 -0600


Hi Bill,
I have used a similar arrangement to what you describe for 15 years of so.
The difference is that I added a 4th
"guy"  just below my lower guy wires.  This extra guy is 1/8 " aircraft
cable and has supported  as many as 3
1/2 inch heliax lines, and 2 control lines.  I would not want any added
stress on any of the primary guy wires.
73, Bob, W5AH



________________________________________________________________________
This list is sponsored by the new eHam.net Store.  When you buy products
like ICE filters, Array Solutions StackMatch, or M-Squared Antennas from
the eHam Store for the same price you pay direct, a portion of the sale
price goes to support this list.  Check it out at http://www.eham.net.

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com