[Towertalk] fulton k2550 winch

[steve takacs]

have found the solution. the pinion gear on the input drive shaft is =
just threaded on. if as in my case everything is glued stuck, put the =
pinion tight in a vise and give the crank a good pull counterclockwise. =
the pinon comes of the shaft and you can clean, replace or whatever the =
brake linings and the clutch plates.  had to look real good at the =
action on a good winch to see this.


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
---