[Towertalk] Ground wire impedance

[Chris BONDE]

At 08:32 AM 2002-07-30 -0400, K7LXC@aol.com wrote:
>  Another poor earth technique is to lay ground
>rods horizontally if you can't get them in vertically.
>
>Cheers,
>Steve    K7LXC
>TOWER TECH
When  I had a new input circuit and service box input, no rods were used, 
as against code.  The grounding was a multipart, thos each wire large, from 
the box out of the house folowing the conduir, then to ground about 3ft 
deep to a horizontal plate.  Yes, a horizontal plate, not a vertical rod.

So the debate on grounding grinds on.

Chris opr VE7HCB