[Towertalk] Raised Guy Stays

[Bill Hider (N3RR)]

Lot's of detail on this on my website: www.erols.com/n3rr
Click on Guy Anchor Subsystem in the System Design section.

Bill, N3RR

----- Original Message -----
From: "Julio" <jperalta@tampabay.rr.com>
To: <towertalk@contesting.com>
Sent: Tuesday, June 25, 2002 7:16 PM
Subject: [Towertalk] Raised Guy Stays


> I'm getting ready to extend the height of a 30' Rohn 25 bracketed tower to
> about 70' and I would like to use raised guy stays ( I think that is what
> they are called ) to get the guy wires above head height. The tower will
> have 3 or 4 long boom  V-UHF beams on it.
>
> What are the thoughts about what material to construct them from. Quite
> frankly I would be interested in any information you guys would like to
> share on the subject.
>
> In addition I've been following the discussion on the Philystran VS EHS
> wire. Is there any concern for the 50 Mz through 1.2 Gz bands? My HF tower
> will be within 50' of one leg of the guys for the VHF tower any problem
> there?
>
> I certainly will appreciate any time anyone would use in answering any or
> all of these questions?
>
> Julio, W4HY
>
>
>
>
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>